Recent content by Andrewm2002

48v DC input. Max draw ~2200w Normal draw ~750w. I've only had it working since yesterday so those values may change. I have it on a 63a breaker. The battery protect is measuring closed circuit with power removed so I guess it's dead.

My Victron battery-protect displays an error (E3) when under-voltage is present but never disconnects the load. I'm assuming at this point that it's damaged, but want to make sure there isn't some programming trick I've missed. I programmed it via the smart app. Anyone had issues with that...

I bought some Calb branded batteries from Deligreen. I haven't got the chance to test them yet but everything seems legit.

When you say loads do you also include accessories such as power to my Morningstar GFDI, Battery Capacity Shunt, etc? I had originally planed to run my battery negative lead to a grounded bus bar with the BMS in between them. From the (-) Bus I would have connected the Charger, Shunt, GFDI...

I'll install the system myself. I can claim all the incentives as long as the equipment has the correct certifications and I pull a construction permit. There were no surprise taxes on the batteries. They came express via Fedex. I've read that express shipments seem to get less scrutiny...

Purely off grid. I'll run it as a supplement to the central heating/cooling. Because it can only be operated by solar I should be able to claim full tax credit on the heat pump. I'm in South Carolina, USA.

Which supplier did you order the batteries and A/C from? My batteries are from Changsha Deligreen Power Co., Ltd. and the A/C is from Ningbo Haishu Cooling New Energy Co., Ltd. I couldn't get the official Calb store on Alibaba to reply to me. My system will consist of 6 ground mounted Longi...

Thanks for the replies Will. I guess my concern with BMS is not knowing what I'm getting. I'm looking at a Daly 120A common port on aliexpress. Whatever I add I just want to make sure I'm not adding more risks as it will be mounted inside the house. I will have it all in a electrical...

No BMS. Plan on running between 90-10% and discharging over around 4 hours. In a system with 2kw of panels and a 48vdc mini-split heat pump.

I have 15 Calb CA100 cells coming from China. Should I balance them before use or let them run a conservative charge regime for a while 1st?