We purchased the EG4 8kw on 25 June 2023 and since installation the unit has not worked properly. It would not start inverting or stop for hours after starting even though the voltages were well within specification and full sun. After many hours with technical support troubleshooting and...
Yes, this would work but only when connected to an active grid with a grid-tie inverter. A single phase 120VAC grid-tied inverter synchronizes to the utility phase then ups the voltage some to provide the amperage to provide power to the house over the utility and if there is surplus, back-feed...
Other than Sol-Ark is there any ONE or DUAL Inverters one on each phase that will support:
Solar + Battery + On/Off Grid + US 240VAC split phase + Zero Export with dual CT coils?
The main issue seems to be the lack of an inverter or two inverters (one on each phase) that will use two “Zero...
Appreciate feedback and edit to this post.
The goal is to provide power to the On-grid home via solar or battery for night or shade, and not have to implement Net Metering, thus Zero Export.
It could be from the manual for the EG4 Hybrid, but I don't see anything about providing zero export...
Have a Sol-Ark 15k with 18 Ampliphi batteries at a remote location. Having intermittent Current Limiting issues being reported by the BMS to the Inverter, thus getting lack of rated charging and discharging as displayed in PowerView. Sol-Ark does not report individual battery data, thus can't...