Hi,
My set up has been working fine so my head has been out of solar world but I had an issue and am looking for some advice.
I have 4 100ah Battleborn batteries in series for 48v running to a 48v mpp all in one.
I also have a bus bar coming off the battery bank feeding 3 12v/24v dc dc...
I am getting close to having my all in one 48v system up and running but wanted to ask someone that knows about fuse sizing when using transformers.
I am using 48v and have a miniature circuit breaker box which has dc breakers in it, or at least it will have.
I plan to run 48v to the breakers...
I am a complete novice at this so please forgive me if questions seem silly.
I have 4 x 12v 100ah battleborn batteries connected in series to give 48v.
I would like to increase the battery bank capacity.
Can I build another 48v bank and connect that in parallel to my existing bank? If so what...
I have been playing around with an all in one for a few months and am having some issues.
I would love to know what I’m doing wrong so any input is much appreciated.
I have attached a hand drawn diagram of my set up.
I have 1260w of solar.
4x 100ah battle borns in series (48v)
Mpp Lv5048
120v...
I finally got my system running, couple of questions.
Does the unit require neutral to be bonded to the ground on the AC Does it occur internally?
I have installed in a school bus conversion.
Does my DC side need to be grounded or Is the negative pole enough? I have grounded the AC side to...
Hi there,
I have a school bus conversion in process that has a 48v lithium battery bank being charged via an mpp all in one and solar array.
I would like to keep the bus 12v battery charged up as I don't move the bus too often. It has 2x12v lead acid starter batteries.
Is there a fairly...
I am looking at buying a mpp solar 5000w 48v 120/240v output all in one.
I have 8 x 160w 12v panels. What would be the best way to wire these to feed the all in one? Series or Parallel ?
Also I plan to use 4 12v 100/ah battle born batteries wired in series as my battery bank.
Maybe a silly...
I have a 48v all in one and battery bank.
Today I had mains power installed at the location I am at and I don’t seem to be able to get the all in one to charge from mains.
The icon for mains shows up but I can’t get it to charge. Is there a voltage setting I am missing? I even tried setting...
I have 4 x 12v battle born 100ah connected in series.
I have a LV 5048 all in one charger/inverter.
What should I set the charge settings at with these lithium batteries?
Hi there,
First of all thank you so much for all the great videos, such an awesome resource!
I bought a school bus that was part converted into an RV, it came with (6) 1000w of solar panels on the roof but not much else. 2 of the panels got damaged on the way home so I need to buy more which...