Most reacted posts

Hello and sorry for digging up this thread. But it seems I have a similar or same battery only without software or cables or a manual. May I ask what the software is called for the PC? I would also like to get the data into my smarthome later to monitor the akuu somewhat.

Hello, if you change to Pylontech with this BMS, can you still access the BMS with the normal (with the previous) cable? Or do you need another cable from the PC to the BMS?

Is this Node-Red? Looks amazing!

Hello, I wanted to add two github links here. There you can find information and newer firmware files. These are not my repositories. https://github.com/christian1980nrw/BMS https://github.com/mytest4u/BMS/issues/5 I did a firmware update from there. However, I won't see if everything is still...

Hello, thank you very much, I will try it. Thanks to @NikArc I have now also two three data from the battery can read and display them via Node Red.

Hello, I hope this is the right forum to ask this question. I bought a battery but did not get instructions or cables or anything. Now the front looks like it could contain a Seplos BMS but after 100 tries I can't read it, not even with the BatteryMonitor from Seplos. So it will be another BMS...

Hi, is the firmware for the DR-JC03 BMS? What protocol you use, the original or the Pylontech?

Sorry, another question, how do you connect it with Venus OS? Wich protocol you use?

My battery / BMS did this 2 days ago. The SOC suddenly went from just under 50% down to 0%. Since I'm a beginner, I unfortunately do not know if the settings in the software are correct. I had never changed anything in the settings and now charge the battery only to 3.33 volts per cell. Does...

The drivers are installed correctly?