Most reacted threads

I pulled my 2 6548's after running my house for 16 months to upgrade to a 18kpv. This was last Saturday. After spending all day running larger wire we get it up and running around 4:30. Took a lot longer then I thought it would for sure. Everything seemed good. I don't remember if I tried AC...

Brand new in box. Looking to go a different route now because I'm grid tied. Also comes with 2 dongles for wifi. I'm in So Ca $1700 + shipping

Looking to sell my 12v victron. Decided to go 24v. Used for one weekend in my trailer and some solar testing at home. It is 13 months old $900 plus shipping. In CA

Selling my 2 6548's. Worked great. Not one issue when I was running them. $700 ea. Will ship at buyers cost

Ok This has turned into a serious project. Biggest problem is I want it to be a nice setup when its done. Will be for my 5th wheel and a portable power station. Well portable but not a light one. Its going to have to be 2 pieces and will link together with a 350 amp anderson plug. At first I...

Anyone here running 6 of these? In the manual it shows dip switch settings for batteries 1-5 then 14-15. Anyone know what #6 would be? Here is a pic of the page in the book. I built this rack and just got it back from powder coating today.

Wondering what the trick is to making it work. I put it on positive side with the board and it won't let my solar through. Did the same on negative and lit let's 22 watts through. What could be wrong?

Posted in inverters also but thought this might get more traffic. Anyone using one? They seem to be the one making the Sol-Ark. I have ran out of luck finding 240/120 parallelable inverters that are UL listed. Biggest issue is support and shipping. Shipping by boat is a crap shoot and by air...

I have 2 8s 24v 280 ah eve batteries that I built. Both running chargery BMS. Built around a year apart. I have been running them paralleled together for around 4 months. They are charged with 6 405 w panels and victron controller. I only charge them to 3.40v. Everything was good until about...

Anyone have any issues when they opened there box? I was surprised that it was ship ground frieght. I can tell the box has been set down/dropped hard. But but not looking that bad. When I finally got help to install and pull it out of box I found damage. The bag of plugs/bolts was in between...

Hello I have watched videos and tried to get my Jakiper batteries talk to my MPP 6548's. I have tried to make there cable and bought a MPP cable also. Still get 61 code and will shut down if I don't switch back to user profile. I have changed the battery settings to mtch MPP also Anything I...

Looking to get a 300 amp bms. Is this a good choice? Going to build a 12v system for my 5th wheel. Will be 8 of the 280 ah cells. Will also use it at work sometimes. Will be using a 3000 w inverter

So I setup the chargery on my 2p4s 280 ah cell pack. I had to recalibrate the shunt and did it twice. I can't get it to read anything in or out. Before I calibrated it was at -2 with nothing going on. I'm using 500amp 75mv shunt from a smart shunt with gauge. Do I need to use the shunt that...

Was wondering what is really best? Plan is to make them out of copper bar.

I'm going to be using chargery BMS for my 2p4s 12v setup. But I want to use a smart shunt so I can use my phone to check on it. Do I have to use 2 shunts?

Anyone running SOK or Jakiper batteries on EG4 18? Settings are lithium 0-19 with no explanation for what is what. I know it's pylon but don't which is that Thanks

Sorry for all the bumb questions. Was wondering if I bolted a brass bung to my copper buss bars would I loose anything? I have brass bar and would have to go find some 1" copper. I'm looking to raise the tie in up through a piece of wood. Wood will sit on top of all the batteries and this would...

I have 2p4s 280 ah eve cells with chargery. Right now chargery is not fully setup because I ordered the ISO board and was sent power board. This all happened right before Chinese New Year so I couldn't finish setup. I also have a Thonewave labs Bluetooth monitor on it so I can see what is going...

So yesterday my top balanced finally finished. I stopped at 3.64 volts. It took right around 48 hrs to do 8 280 AH. I took apart and let sit over night. This is how it settled. Should I top off again or discharge to 2.60 volts?

I was told by Solar Assistant that I connect batteries straight to the it instead of going through inverter. I only need 2 wires to use a USB to RS 485. So I ordered one and the out on it is + and -. Now I need to now what + and - is on the RS 485 on the battery. Anyone know by chance? I have...

Anyone know what batteries this thing will talk to? I have Jakiper and SOK which are same protocols. Thanks

What is the best way to run a 2-8s 300 amp chargery for a 12v setup? I have 8 280ah sells on the way and a chargery with 300 DCC. This is for my 5th wheel. I was told to go 24v but I have a lot of 12v to run. Plus I would have to use a 12v battery to start my 4000 w onan. Thanks

Anyone know how to get the second AC output to work? Haven't had any luck finding out how. Also I need to move the switch to outside the enclosure I'm building. Anyone try doing that. Switch is mounted to the circuit board. Thanks