Hello,
I have a 6kw 2P14S pouch cell battery. I have a JK BMS with BT. I have no idea if that BMS's RS-485 can communicate
with the TP6048, so I had to select USR in the menu for battery type.
The inverter has been charging the battery, but I am not clear on the numbers I should be using for...
New to this forum!
I have two systems now: 1. an 8kw system with two Fronius inverters going to a separate power meter. This system is under contract with GA Power Company, and I receive $0.096/kw for my power. 2. an 6kw system with an SMA inverter, grid-tie. I only get around $0.035/kw for...
hello,
First day of use with the TP6048. Hooked AC in and PV string. Enabled grid-tie.
Seemed to produce power back to the grid.
Did not notice, at first, the current was unbalanced. 4 amps on L1 and 8 amps on L2.
Did a sanity check by looking at my SMA inverter in grid-tie. L1 and L2 were...
Hello,
I currently run two grid-tie systems, 8kw Fronius, and a 6kw SMA. The 8k is under contract with GA Power going to a separate meter,, paying me $0.096/kw.
The 6kw is going to the house panel, a 'normal' grid-tie.
I want a new hybrid inverter to replace the SMA, and add LFP batteries. I...
Hello,
I have 3 grid-tie inverters, and have done this without battery backup for many years.
Twp Fronius inverters and a 7kw SMA grid-tie. 14kw PV
Bought and received the TP6048 Hybrid Inverter.
Read the book, watched a few videos.
It is UNCLEAR to me how to achieve Grid-tie using this unit...