Gttnsun's latest activity

I purchased my XW PRo from Zonna, through a installer, he got wholesale and marked it up a little, I liked that they repair inverters...

My system is working great also, I upgraded from a older Magnum inverter so the technology took some reading and videos to understand...

It's good to have the option to get a permit if needed someday. I see alot of people say they will never get a permit, but unfortunately...

I have Dual Xw Pro Commissioned in January of this year, running off grid the firmware i am running is Insight Facility at v1.18 and XWP...

https://product-selection.grundfos.com/us/products/sqflex/11-sqf-2-95027335 I have this model, I run it on direct solar or on 120v ac...

Here is a webinar from Schneider for 3 phase XW Pro to add to the resources

Here is a closeup of the diagram

This model Square D 600V DC Disconnect Switch - 60A, 3-Pole, NEMA 3R (HU362RB) Has a bulletin that says you can switch 1 conductor with...

If people are wanting their inverter do grid mixing management, which most are, then Schneider Conext is looking pretty old and clunky...

What's prob happened is those Schneider owners are just continuing to use those as appliances. They just work. So they don't need to be...

I see the problem. You don't have a real inverter. lol

I see what happened. I had posted the link in a reply earlier in this thread, but when I copied the URL from there to post it again...

I ran the generator for 1.5 hour. The input voltage was oscillating between 228.9 and 231.9V, but was mostly stable at that upper value...

Thanks for sharing the XW maintenance manual, I have XW Pro but I think they are similar.

Your plan appears to match how Schneider explains the system to function in their webinars. The PDP is optional and you can wire...

That filter was dirty, did that solve your heat problem?

The fans blow out the top of the inverter, make sure nothing is stored on top of the inverter. When the inverter is hot you should be...

I have a Magnum 4448 that is 15 years old, I just retired it. Not because it was broken, only because I needed to upgrade to a larger...

In the webinar it shows a few different configurations, one shows using 2 PDP's and 4 XWs. I think the max number of XW per PDP is 3, so...

Thank you @FilterGuy. The transfer time between grid and inverter in the BCS puzzles me a bit. Think it’s listed at 50ms but does it...