jassdhali's latest activity

Yea that is definitely a unique setup. It’s just basically arbitrage.

Simple, I live in the UK, we have no sun at the best of times :) The energy supplier we use has a low cost tariff in the morning hours...

From what I have read its best not to hit max every time with these cells. Obviously I may be wrong :)

Hi, Just setup my system: 15 420w Jinko Solar Panels 5kW Sunsynk Hybrid inverter Seplos Mason 48V 14.3kWh battery with 16 Grade A V3...

Google is your friend: https://www.merriam-webster.com/dictionary/TL%3BDR

Ha Ha I get it :) Hopefully my last post may not be ?

Currently top balancing my battery pack before discharge. The one thing I am unsure of is that the total current is still @ a minus...

Not sure what a Tldr is - but I think it was down to my unfamiliarity with the remote settings, I have a better understanding, so I am...

Think I have found the issue - https://powerforum.co.za/topic/18448-sunsynk-5kw-settings-not-sticking-assistanceadvice-please/ Just in...

Morning, Thought I would fire the setup again this am. The battery pack took charge - went from 1.9 to 97.2% SOC (within 4 minutes) hit...

Hi, Hope you can help. Setup my Sunsynk 5kW with Seplos 280 aH with v3.0 bms Inverter came on, battery pack started charging, then...

The starting voltage is set via the dry contact switch So in a way Andy is wrong (its not often but has been a few times)

Yes, just use a switch instead of the dry contact interface on BMS.

Hi, I had a similar issue in connecting my PC to BMS v3. Was trying the RS4851 port, had a cable from Fogstar - didnt work Ordered the...

At the minute I am at the fist stage of top balancing, once I actually get my head around what cables I will use :)

How bad are your cells you need a 4a? Or are you planning on a high C discharge?

sale the Neey on and just use the seplos active balancer (it works well)

I will be trying both, but have been advised NEEY is better

Not a problem.

Thanks for the replies, so just to move to next concern. Am I right in thinking I would be able to reduce the length of some of the...