Recent content by juf

-V14.20 Upgrade logs 1. Button shutdown logic detection and optimization. 2. Bluetooth communication optimization. -@2024-01-17 by JKBMS

Thx for test. At my german windows I donˋt can see this with the 2.5.0 version at all. so one bug more….

Hi, can’t find „4.Add battery low temperature alarm to dry triggers.“ do I need a new app version. mine are iOS 4.17 regards

Hi Nami, is there any news? regards

By the way cah you send me the actual FW for this new BMS? Have the PB2A16S20P version. thx

hi, maby helpfull this http://www.rec-bms.com/datasheet/UserManual_REC_Victron_BMS.pdf https://www.victronenergy.com/upload/documents/VE.Can-registers-public.pdf https://community.victronenergy.com/storage/attachments/21873-simp-bms-setup-manual-v025.pdf

I think you right, this issue are only after boot. ? this system are not online is my Testsystem

Hi, runs fine with serial now. but the alarms are wrong i charge to 28V with this parameters

Where I can find „I upload a new bin with Serial an Bt Connection u can activate one or other. “?

Thx so I try out 16 and 17 or 18 and 19. but at the google drive I don’t find any new bin file. as i flash this ??‍♂️

sure I have change the protokol. at your pic you have other pin for. I‘ll try with the new gpio. regards ??

Hi, I try today the serial connection. wonˋt work ??‍♂️ Bluetooth all fine. yes I have change the cable tx/rx and return.

Hi, thx for answer. But this parameters are not fine for me. At my 24V Akku I use as discharge voltage 3V x 8 = 24V as limit. for the charge and discharge current there is an display issue the masure are A and not Ah ? I use Victron MultiPlus within this will managed by Venus OS run at the...

Thx the key works. all fine with the connection. have three wishes: - display also the cell resistance at the web ui, possible to get over BT. - let’s change this parameters CAN Parameters Charge Voltage 28.00 V Charge Current 55.00 Ah Discharge Current 50.00 Ah Discharge Voltage...

You mean this? - esp32 Regards