Recent content by NewJersey

I'm not sure I follow all of that, but basically you'd want to plug it in where there are the least loads? I'm talking about 2 100w panels so this as small as is possible. Anybody know what kind of connector plugs into the microinverter I posted for the OUT ac power? I'd like to find a cable...

Grid Tie Micro Inverter 10.8V30V DC to AC Solar Microinverter Inverter (GMI-180L-AC110V) https://a.co/d/i5DBGdN So this wired to a male plug and plugged into any outlet in the house? The panels just sit outside anyways. I appreciate the responses btw

Thanks guys. I didn't realize "syncing with the grid" was a thing

So, I love solar stuff and watch a lot of YouTube content about it. I was watching one video where a guy had a Y&H branded microinverter that he plugged 4 solar panels into and then plugged that into an outdoor electric outlet. It could put around 1000w back into the house. This seems pretty...

$1920 for 28kwh is fkng INSANE

I was looking at the Anker c1000 but this question really pertains to all of these units as they often have pretty tight limits to hit their claimed max PV input. The c1000 has a 60v/20a max and claims it can accept 600w. I was looking at...

Hi all, I have an Anker 535 and charge it with two fixed 100w panels wired in parallel. (To fit the charge controller specs) The 535 is rated for max 120w, but I have for months now seen it accept right up to 140w. What is the limiting factor? The mppt controller itself, the wiring, or did Anker...