Most reacted threads

I have recently connected a Daly bms (16s, 120amp discharge, 60 amp charge ) to my lithium iron phosphate battery bank. All is working as it should. However, I have a question. If I need to do any work on my battery bank / BMS, can I disconnect the balancing leads (the plug with 17 wires) from...

Hi. I have two growatt 5000es hybrid inverters connected in parallel. All connections are correct as per instructions: For each inverter: AC input: 230v L and N and ground Ac output: 230 v L and N and ground So ground of input and output are connected to same ground wire. PV input: 300V...

Hi. I have a large lead acid battery bank (12 tubular deep cycle flooded lead acid 12v batteries connected as 48v system). They are fairly new (probably 75 cycles max). Then I decided to switch to lithium iron phosphate with which I'm very happy. However I don't want to get rid of my lead acid...

Hi. I bought two growatt 5000ES inverters. They both come with the wires required for parallel operation. I followed the instructions and connected them and programmed them to parallel single phase (one is a master and one is a slave). All is working fine (since yesterday). However, ever since I...