Eleven years ago I installed a 2 array, 5.6kw grid tied system on my home. Since my home was not ideally situated, I ended up with SE and SW roof mounted arrays. The original system was close to net zero at the time, but as the years went by, my usage increased. Looking at either a ground...
I have a like new solar water heater for sale. It is an AET Thermomiser unit complete with a built in stainless heat exchanger coil and back up 4500 watt electric element. This unit has been used for storage only - the electric element has never even been wired up, and the HX heat exchanger...
I have a like new solar water heater for sale. It is an AET ThermoMiser unit complete with a built in stainless heat exchanger coil and back up 4500 watt electric element. This unit has been used for storage only - the electric element has never even been wired up, and the HX heat exchanger coil...
I will be adding another array to my 11 year old Schneider XW6048, and would like to use the newer Schneider 600v MPPT controller, as I will have several hundred feet to the new array. I currently have 2 of the older, smaller Schneider 60/150 solar controllers. I have talked to Schneider, and...
I have the original Schneider XW6048, and it is working great, but I am considering buying a newer XW6848 for a spare, as it is getting a bit old and don't want to be hung up waiting on a replacement. My question is will it fit in the same space, and are all of the connections located in the...
I have an older XW6048 inverter, and recently changed out my 11 year old Concorde 256ah AGM's to 2 Trophy 230ah lithiums. It all works fine, except for one little quirk - the inverter grid sell display and transformer will not turn off with the end of solar charging each day. I don't like the...