Recent content by Pigsy

oh forgot, did you get the rs232 to usb cable as its not with the device? cheers

Looking good there, thanks for the videos, glad its worked well for you. Wished i could say the same, i have tried connecting to an Epever 5000uphi with the same battery and Epever bms link and not sure if its compatible afterall. Battery i have set at program 11 and i get the BME error...

Thanks very much that makes it very easy for me to understand now. I am wondering though why do they not include the Ground GND or 5v power. I guess it’s driven through the EPEVER side or they both internally send information back and forth just through the signal wire that also makes sense...

Cheers for coming back to me. So I got a BMS link and who would believe it comes with a pylon tech cable 🤛 should be easy peezy. I’ll attach the picture of documentation just to make sure I’ve got it right. Apparently battery side when you set it up you just tell it to look at pylontech or...

Hi guys, I’m installing the above inverter and troubled as to how to read the instructions pin out, let’s explain. As per Pictures the BMS is a 200A pace BMS. 1. Do I set up to use CAN or RS485 and link one to the B RJ45 inside unit as it’s a bit misleading as EPEVER say you must use and buy...

What are the pins on each please.

Sorry for late reply. Not sure on my model I think I may need to buy a different model to do hybrid.

My BMS wind do anything other than Bluetooth light comes on and occasional light flashes on pcb BMS. I had connected the BMS to the rs485 port and looking on windows trying to connect to the JBD tool v4.3 I was connecting to AFE_NUVOTON SET TO English ports on com4 9600 none 8 1 rtc off, would...

I have a Growatt 3600 TL-X installed and x8 Eve LF230 batteries which im looking to get another x8 at some point. I have a 24v 50amp charger i propose to install on a socket wifi controlled switch to come on when two conditions are met via time controlled and a photo cell says its bright enough...

Just wondering what mppt are you using as i have the lP3000-22-Plus (T) and don't really know if an epever mppt will talk to my inverter!? Its a first install for me so I'm a right novice. I too have a 24v system running. The instructions don't tell me what the green plug in with screw terminals...