Got reply from Seplos "lem <alan@seplos.com>":
"This number can be connected to the battery monitor to check the firmware version. If it starts with 0., it is v10. If it starts with 1., it is v11.
There are no big changes in these two models."
Hello, i've a Seplos V3 200A with firmware 0.6 on a 16S lifepo4 battery.
I have some trouble with the SoC reset to 100% when its fully charged on my destination voltage at 55,2V.
Cell overvoltage alarm is set to 3,44v
Battery overvoltage alarm to 55,04v
Charge request voltage is 55,4v
I...