ruralsolar's latest activity
-
RCOMMUNICATIONS: Canbus : Victron, SMA, Studer Innotec, Sofar, Solark, Solis, Goodwe, Deye, Growatt, SAJ, LUXPOWER, Megarevo, INVT...
-
Rruralsolar reacted to avengers_assemble's post in the thread Ruixu 16kWh LiFePO4 Early Adopter with
Like.
My bad, I made a typo in the title of this thread. It’s supposed to read 16kWh -
Rruralsolar reacted to krazyclimber's post in the thread Ruixu 16kWh LiFePO4 Early Adopter with Like.
Spec sheet says it's 314Ah and 16KWh for $2999.00 with discount until 4/30. Shipping is $350.00. EG4 PowerPro 280Ah and 14.3KWh $3799.00
-
Rruralsolar replied to the thread Ruixu 16kWh LiFePO4 Early Adopter.Given the early adopter discount bringing the cost per kwh way down, it's tempting...have until April 30th to get it at that price...
-
RDon't have it yet, but will in about a month.
-
Rruralsolar reacted to avengers_assemble's post in the thread Ruixu 16kWh LiFePO4 Early Adopter with Like.
I saw Ruixu has a new 16kWh LiFePO4 battery with built in self-heating and IP65 waterproof rating (can be put outside), there's a $400...
-
RI received the same email :) I wish I would have waited for some self heating units as our 'power shack' is unheated. Already have 4...
-
RJust got the email this morning, a wall mount or floor mount (with wheels) Ruixu battery. 16kwh (314 Ah) self-heating with canbus and...
-
RDefinitely. If for 15kWh, wall mount will be the choice. Clear and loud 😂
-
Rruralsolar replied to the thread Rack Mount or Wall Mount.All accurate I'd say! For me though, I'm only planning on a single purchase of up to ~15kwh of battery, I have "ok" space for a rack...
-
Rruralsolar replied to the thread End of ground source with R290 monoblocks?.Ground source in the northern states will always be an option if someone has the funding to do so. Air Source works well but the ground...
-
Rruralsolar replied to the thread End of ground source with R290 monoblocks?.Lookup john siegenthaler, he's been pushing low temp hydronics for decades, lot of webinars on YouTube. You can go no buffer tank but...
-
Rruralsolar reacted to Zwy's post in the thread End of ground source with R290 monoblocks? with Like.
As for R290 units, can't say, I haven't approached that part of my 2 year project. Any monoblock unit will require a buffer tank for...
-
Rruralsolar reacted to Nobodybusiness's post in the thread December PV starting off crappy again. with Like.
I find myself in the enviable position of not using what I make now. Battery is full by noon and whatever raining cloudy days really...
-
Rruralsolar reacted to Pi Curio's post in the thread What was your worse DIY solar mistake ever? with Like.
That I started with solar at the end of 2022 when prices were at all time high. It takes half the cost to do the same thing now.
-
RRVs use 12 volt lighting, so 12 VDC is an option. If you have 24 VDC, there are still options, but not as many. There’s even dual 12...
-
Rruralsolar replied to the thread 12V LiFePo4 for shed.So I did get as far as getting a cooler, little controller for temp with a 20 watt heater and a "master" switch mounted to the outside...
-
Rruralsolar replied to the thread 16kw DC Solar with Sol-ark 15k.Uuuggghhhh, after a windstorm I now have L2 under producing, appears similar to an issue I had before with a loose/bad connection. I...
-
Rruralsolar reacted to millsan1's post in the thread Grounding and rapid shutdown questions for my 12.9KW ground mount array with Like.
My understanding of code is that you only ground in 1 location, from the 1st point of disconnect. That being said, I believe the newest...
-
Rruralsolar replied to the thread Grounding and rapid shutdown questions for my 12.9KW ground mount array.Folks here suggested it as did the group I worked with where I purchased the hardware. The system is up and running, no issues, whether...