Most reacted posts
-
Post in thread: 812 PIP AC Input 10 Amp Breaker.
How would one go about installing a 10 amp circuit breaker to the AC input line (or in my case, an extension cord) between grid power and the PIP? I'm just wondering if there is an easier way than wiring a breaker box. Thanks.- Reaction score: 0
-
Post in thread: 812 PIP AC Input 10 Amp Breaker.
CAUTION!! Before connecting to AC input power source, please install a separate AC breaker between inverter and AC input power source. This will ensure the inverter can be securely disconnected during maintenance and fully protected from over current of AC input. The recommended spec of AC...- Reaction score: 0
-
Post in thread: Alternator Hookup to a All-In-One MPP Solar unit (12V, 800W, 120VAC)
To the MPP itself, no. It has a max dc input of 40 (default) 60 (max) amps, and that is through the mppt charge controller, which does not sound healthy. lol If I were to do this in my own van, I would hook it up to the BB lifepo4. But, I also read the following on amazon questions. So I would...- Reaction score: 0
-
Post in thread: Do setting persist after Power loss? and Rated Solar Questions
https://3415913.app.netsuite.com/core/media/media.nl?id=2520695&c=3415913&h=159a7562e40c3e2a9467&_xt=.pdf Hello Ian, could I put two of these CS3U-375MB-FG in series without causing damage to the 800W 12V PIP?- Reaction score: 0
-
Post in thread: Alternator Hookup to a All-In-One MPP Solar unit (12V, 800W, 120VAC)
- Reaction score: 0