Is .250 x 1" tinned copper acceptable for making bus bars? There is an option of .1875 x 1" but copper only. I'm pulling the cells out of of my SHUNBIN 12v batteries and making a 48v setup with Overkill Solar 16s BMS. Considering that this setup is 100 amps max drawing from battery bank, is 2/0...
Hi,
I am ordering 64 EVE LF380K batteries today. The bulk pricing is (and has been ) a bit messed up. The boss agreed to sell them for $149 as the price goes up if I put over 15 in my cart. Will be using overkill solar 48v BMS again. Was able to get shipping down to $450 (approx 800 lbs) by...
Dismantling four 12v SHUNBIN Amazon LiFEPO4 batteries because two of the BMS's have burned up. This leaved me 32 large cells.
1. Should I use 16 cells per BMS or will running them 2p be ok?
2. The Overkill directions recommend 2 AWG for the positive lead. So is 2 gauge pos/neg is the max size...
I have had 3/4 Outback FlexMax 80's die on me. My original intention was to oversize the number of panels so I could max out the 80 amps. Original configuration was 12x300w panels. I increased the panels to 18 per charge controller and panels are 300-370watts (3 per string, 6 strings). The...