Recent content by Systems Planet

Just finished adding a second 30 kWH RUiXU cabinet to my Sol-ark 15k. The process I followed to introduce a new cabinet to an existing one: Fully charge RUiXU1 Solark config: disable battery Solark: disable DC breaker RUiXU1 power off every box RUiXU1 change master dip 6 to off Connect RUiXU2...

Thank you for your prompt reply. Everything is working now. On the top battery I set switch 6 on. Every other switch is off on every battery. I had to start each battery, one at a time, delaying 10 seconds between each start. Otherwise I was getting multiple Masters. I love your server rack...

Can Bus ID Your diagram indicates every slave should have the same switch setting. So how does the solark address a battery? IE How does its Can ID get set? Doesn't each battery need a unique ID? Sol-ark settings Can you check my solark settings in the three images above?

Can anyone validate my solark settings for connecting to 6 100Ah RUiXUs?

I dont understand the RUiXU dip switches. I have a rack of 6 batteries but the switches have no place to set the Can id. How do you specify the master battery? How do you specify each Can bus ID? I need protocol ID 2, which is dip switch 6. Do I set switch 6 on every battery?

But telling a complete stranger "Time to revisit basics" is polite?

Today I've learned..... When you share a helpful post on this forum, you get: - accused of using 'hap hazard methods' - told to "revisit basics & safety methods" - accused of "disrespect" - attacked with bogus appeals to authority Please ignore anyone on this forum who is so smart that they...

Dude. I've lived through Outback, Solark and EG4 inverters. This is not my first rodeo. This was a test rack that I built myself by hand and it behaved beautifully for four years. I've intentionally ran it balls out 100% charge to discharge daily. I got every dollar out of what little I...

Pat yourself on the back

Alligator clips connect the cells to the balancer

My home build LTO battery had a fire last night. We heard a large pop and came out to find a small arc fire in one of the cells. One of the cells had popped completly apart. The wiring was arcing and causing a small flame. We were running five 10 amp active balancers on five 22S banks...

I have four 400 watt panels and they won't provide enough power to run a mini split for very long. I can only run for one full day then charge for 5 days using a 30kWH battery. This is from South Carolina sun.

No issues vacuuming. I wrapped the wires with this tape: https://www.amazon.com/dp/B07Q8T3SSP My lift is the best money I ever spent. It's all aluninum, so it's light. But it has lifted 600 lbs. I use it daily. I built the stand thinking I could drive it into the ground with a hammer. Not...

Do you mean in conduit? Never.

I just installed a Della brand midway up the wall