Recent content by TechMaster_Sree

Now i am using inverter with can communication and after the latest firmware update it seems to be much better. Using 100Ah Highstar cells , Now I have changed the design capacity, FCC RM to 105Ah after charging to 56.8V and set 56.8V as pack full and Alam Voltage since its sending alam voltage...

When I have tested with JUNCTECH KG110F Battery Moniter, there is a small difference in the volt and Amp may be that cause this issue. per day its reducing about 2.5A in one bms

I have tested the issue with almost 8 BMS and all of them have same issue

did you get any solution for SOC problem. I also facing the same and reported to TDT

Thanks I will check it out. I have also noticed that after few cycles the FCC (Full charge capacity) is incrementing in one BMS and decrementing in another one . did you experienced anything like this

Did you tried the pack full voltage option using TDT pc software, I am using 16S LFP config with 6022. settings will be similar even though there is change in chemistry

Hi, I am also using TDT 6022, could you please explain that how you have managed to get the data via wifi . Are you using Bluetooth to Home assistant or RS 232 to home assistant then WiFi from home assistant or any other method. Also please share the links if any. Thanks

Thanks for the info, I am also using same model but not tried multiple packs in parallel. are you still having the issue. Did you get a chance to check the 6032 model with active balancer ?