WindWizard's latest activity
-
WindWizard replied to the thread Heat on terminals..I would get a multimeter and then measure the voltage drop at 150 amp load to test the crimp connections, fuse, wires etc. This will... -
WindWizard replied to the thread DIY garage system problems.It could be a number of things. If your inverter is going into low voltage, then that implies that the voltage at the inverter is low...
-
WindWizard replied to the thread 12v 10a 230Wh 18ah system with low temp protection under $200 without panels.I have been called a cheapskate by some people, but I cannot recommend the proposed System. It may be okay to dabble a bit in solar with...
-
WindWizard replied to the thread What makes you happy?.February, back off grid again until November.
-
After trying all the cheap chinese inverters, EG4, MPP solar, etc and finally went with Victron. Solved all of my problems. That makes...
-
WindWizard replied to the thread need a little help with the right chargecontroller!.I changed my Outbacks to Victrons for a reason. They work great, bluetooth is awesome, plenty of support. Some things you just have to...
-
WindWizard replied to the thread Exceeding voltage or amps on SCC.My thought on the matter is that the MPPT controllers are just that. A Maximum Power Point Tracker. A typical Solar Panel does not...
