Steve_S
Offgrid Cabineer, N.E. Ontario, Canada
I just built two more batteries (1x 24V/105 utility pack & 1x 24V/280AH) with the same BMS' from a batch that I used in my battery bank [JK-B2A24S15P]. All BMS were bought at one time. I granted permissions for Location, and paired ONE new battery for testing purposes before putting it into my Battery Bank using a Bench PowerSupply.
Now I am unable to access the other Online BMS' ! They want to be paired again and neither 1234 or 123456 passwords are accepted. This is with the most recent version 4.9.2 (build 68)
NOTE JK Version 4.9.3 (build 69) will not install on my phone (Android 11)
I Uninstalled 4.9.2 and replaced it with the last Known Good 4.7.4. (The version I used originally to commission my Bank BMS') and I am prompted to Pair Again and I get a Pairing Failed message. So now I can access the New Battery I setup but NOT the 4 packs in the battery bank.
I then went into App-Info on the phone and cleared the cache & data, uninstalled the APP and restarted phone, then installed the enjpower-bms-4.8.1.128-21 which used to work as well. This still let's me into the New Pack after giving it Location Perms & Pairing it but NOT the batteries in the bank !
I have renamed the packs and they all appear in the SCAN but never changed the passwords.
NB: I have been updating the App from the Extreme BMS (pgyer.com) page.
I've left Feedback on PGYER for the developer to see as well as I sent a Direct E-Mail to @Nami at Hankzor but now I have to wait out the Time Difference
Now I am unable to access the other Online BMS' ! They want to be paired again and neither 1234 or 123456 passwords are accepted. This is with the most recent version 4.9.2 (build 68)
NOTE JK Version 4.9.3 (build 69) will not install on my phone (Android 11)
I Uninstalled 4.9.2 and replaced it with the last Known Good 4.7.4. (The version I used originally to commission my Bank BMS') and I am prompted to Pair Again and I get a Pairing Failed message. So now I can access the New Battery I setup but NOT the 4 packs in the battery bank.
I then went into App-Info on the phone and cleared the cache & data, uninstalled the APP and restarted phone, then installed the enjpower-bms-4.8.1.128-21 which used to work as well. This still let's me into the New Pack after giving it Location Perms & Pairing it but NOT the batteries in the bank !
I have renamed the packs and they all appear in the SCAN but never changed the passwords.
NB: I have been updating the App from the Extreme BMS (pgyer.com) page.
I've left Feedback on PGYER for the developer to see as well as I sent a Direct E-Mail to @Nami at Hankzor but now I have to wait out the Time Difference
Last edited: