Just curious. The BMS can charge individual batteries (balancing) and can shut-off the entire battery via the BMS circuit board. All the batteries are connected together via the bus bars, and are connected to the inverter, or grid or generator. I don't think there is any circuits/electronics inside any of the 16 LifePo4 batteries, so how does a BMS control the power flow to individual batteries. Since they are all wired together and the balance lead is attached to the bus bar, even if you flow more juice to 1 battery via the balance leads, wouldn't that also flow through the bus bars into the other batteries? Scratching my head on this one.