tve
New Member
Your video doesn't show how the batteries are connected to the Sol-Ark (tip: it's on the very left).
EG4 hub overriding sol-ark settings(absorb,equalization, float)
- Thread starter ddeatrich
- Start date
@Zapper77 or anyone else seeing this thread.. Are there updated voltage settings to set for the EG4 Lifepower4 batteries? Right now, my float, absorption, and equalization is set to 56.5v from the hub. I can only set one voltage on the hub that sets all 3 of these in my inverter. Not sure that 56.5 is the best voltage to use.
Zapper77
Renaissance Man
- Joined
- Jul 23, 2022
- Messages
- 2,341
I still run 56.5v on my LP4 that are 2 years old. occasionally I'll bump up to 57v if one of the battey BMS fail to reset SOC to 100%.
Perfect. I'm having that exact issue so I'll bump up to 57 temporarily. Thanks!!
Zapper77
Renaissance Man
- Joined
- Jul 23, 2022
- Messages
- 2,341
from my experience the Cell OV will trigger 100% SOC prior to the Average Cell Voltage Triggering 100%. Now when your batteries are perfectly balanced, you may find that you will need a higher bulk to trigger 100% SOC.
Similar threads
