wheresthesun
New Member
- Joined
- Jul 24, 2020
- Messages
- 29
Back again with more noob questions.
Today I noticed my SCC is not outputting a lot of amps, max about 0.6A. I have one 100W on it and i have tested and it is outputting @ 21V. However, the SCC shows about 14V. I have an attached screen shot but I have seriously loaded the battery and it drop to ~ 12.3 (not in this screen shot) but still the SCC stays at ~0.5A. Its an EPEVER Tracer 30A.
I have confirmed polarity and wires correctly attached etc. Is this normal, shouldn't the amps increase with load?
Today I noticed my SCC is not outputting a lot of amps, max about 0.6A. I have one 100W on it and i have tested and it is outputting @ 21V. However, the SCC shows about 14V. I have an attached screen shot but I have seriously loaded the battery and it drop to ~ 12.3 (not in this screen shot) but still the SCC stays at ~0.5A. Its an EPEVER Tracer 30A.
I have confirmed polarity and wires correctly attached etc. Is this normal, shouldn't the amps increase with load?