Search results

Currently the TDT6032 and TD6022 firmwares are OK. The BMS is fully functional even in parallel operation. The only problem I sometimes have is with the SOC calibration

sorry, I haven't tested this. I set up each BMS separately. The Master BMS communicates correctly with the Inverter. SOC is the average of the SOC of individual packs and the current is the sum

PC connection from MJBDtolls?

pack is detected as Liontron B009. But the victron doesn't charge. you have no idea where the problem might be. I believe victron detects it as 15S.... the BMS is set to Victron CAN protocol

hi, do you have last FW for JBD-UP16S010-L16S-200A? I have a problem with a Victron inverter. Cerbo BMS detects as B009 which is probably 15S Pylontech. And it doesn't charge

I got hold of a BMS from JBD, which has exactly the same connectors for cells, the same NTC, the same mounting holes for the board and for the display and buttons... it seems that JBD has solved the problem.

I installed tens of BMS TDT 6022 in my packs. The BMS itself is functional, setting the parameters it sends via CAN or RS485 is just as confusing as with SEPLOS. But if you connect more BMS in parallel communication errors occur randomly and incorrect values are sent to the inverter. Victron...