Search results

I purchased 8 cells of 75ah to build a 24v battery. I cut fiber board and surrounded the cells and compressed slightly. I purchased a Daly 8s 100Amp Sodium Ion BMS. What I received was a Lifepo4 BMS with BMS settings. I used (user defined) and all the range necessary for Sodium Ion is within any...

I purchased a BMS for the Sodium Ion 75WA 24V battery pictured. The settings were for Lifepo4 and the lifepo4 was blacked out with Marker. I can use any BMS for lifepo4 by going into the user defined. So everybody! WHAT SHOULD THE CHARGING SETTING BE FOR A 16AMP VICTRON24V CHARGER???? also...

https://www.fuelzero.com/4000-12000w-24v-Split-Phase-PureSinewave-Inverter-p/fz-ep3300-4kw-24v-sp.htm Im looking at the 4000 watt to run a well pump as an emergency backup. does anybody have one of these in any size? anybody know anything about the company?

THANK YOU! This is a very good starting point for the build

when using a seperate port BMS on a Lifepo4 battery, were do you place the shunt? on the battery where the Blue wire attaches, as this is the charging and draw point. The load wire would only measure the outgoing load. Would this be correct? place the shunt on the battery negative and then...

Im reading that the Victron 100/20 is the largest solar controller with low voltage shutdown of 47.2VDC , to the load port. I actually have a make sky blue new in the box some where i never opened, and i see this 60 amp controller also has a low voltage shutdown, i need to research this one...

Exactly how do you set up your dc to shut off an Ac freezer

you can go in and set the load to shut down at your desired voltage?

Did you mean midnight Classic???

The inverter will be connected di I will connect the inverter directly to the Batteries, with a relay disrupting current flow. I want to use the load settings and the load to control the relay when the battery voltage drops to 24V, should i draw a picture? All im asking here is what models of...

I have been told that some Solar MPPT charge controllers have the capability to adjust the low voltage cut off on the load portion of the charger. Actually the load is only meant for a light bulb or Two(2). My goal or desire is to set the load voltage to shut off when the voltage gets down to...

Can anybody tell me the models of any Solar charge controllers that allow you to set the load portion to cut off at a low voltage set to a desired setting?? I would like to set a rely up to control my inverter

Will has a vodeo where his BMS jas a light

I wanted to make sure it wasnt something i did. Okay i will contact daly

No replys??

I have several Daly BMS and after connecting i do get correct voltage on both testing methods, direct battery testing and then i get the same voltage when testing thru the bms. But the light does not come on with any of the 3 i have connected. 60 amp common, 80 amp common, and a 120 amp seperate...

This doesn't show the one in the video, it only shows what you can Select from

That model is not on the list. It shows a 5kw split phase on the site, the one in the video is not that model

Not the same model

Will posted a video. He neglected to mention the model number, does a abody know what the smallest mpp 48v all in One is that he used in the video???

Will made a video putting together a 48v mpp all in one system about 5 months ago. In the video he said that unit was the smallest 48v made by that company. Does anyone know the model number? It must have slipped wills mind to explain what model he was assembling.

when you open the double shipping container doors there is an 18 inch utility chase before you see the wall that the bathroom is behind. an on demand propane water heater, 12v RV water pump, and my Two(2) solar charge controller board/systems, and other items mounted.

I purchased 16 cells for 34.74 each plus shipping from China at alibaba, it was 732.00 to the door with busbars and shipping included. They are 105ah each and I used 2 cells in parellel and then 8 of those in series to make a 24v battery. I only had a saws all so making a box to silp them into...

Okay, the seller just explained that these will discharge differently as they have different chemistry being manufactured in different factories. I have asked the supplier to send all 16 in the new style and I will send back the 8 old style. Problem solved. I will have 16 matched cells to work with

in the email it showed the victron battery equalizer, I read the data and they are for use with an alternator, and it allows the starting battery to stay full but not the other. do they have more than one model?

like what? nothing got posted

How should we do this???? understand each of the 8 cell 24V batteries come from different factories. 8 from one place and 8 from another, but all are 80AH

I come to agree about using dual charge controllers, so now my problem to solve is how will I connect the converter/load to both 24v battery banks. ???? whats a good way to connect the strings to the converter?

I understoood all but the last line: Common Charge/Discharge Terminals, Separate BMS for each series group.

the other batteries are not mine, they are not going to be used. the old is the first shipment I received, and the new is what is in the post being sent now. my question is: how should I wire these to One(1) victron charge controller, and 1 converter 24v to 110AC? I will use 2 different 24 volt...

I have 8 new never used of each size and style 80AH batteries. 16 total! I understand I can not use all in a 16 cell battery. I will use 2 common port 8s BMS and 8 cells in each 24 v battery. I would like to use One(1) victron charge controller, and One(1) 2000 Watt converter 24v to 110AC. with...

Thanks for the info

I purchased 8 lifepo4 batteries from ebay that are supposed to be 80AH. They don't look new, What should an 80 AH lithium iron phasphate battery weigh with plastic case? Where can I buy the meter that's used in all his videos to determine AH of the batteries. How do I tell if I got used 100AH...

I have 2ead acid deep cycle Marine, and 2 deep cycle AGM, I will put each pair on their own Solar Charge controller