Search results

Van has 175w panel, once house battery is charged energy is wasted, can this controller be made to send excess charge power to Ecoflow Delta 2, through the load connections via the included Delta charge lead. Mppt is next to my power station. Van has one AGM92amp hr battery.

Thanks, that makes sense, I assumed there was bulk and absorption setting but after reading the manual, it just reduces current.

Just about to fit Renogy 40 amp DC-DC charger. Battery is 12V 160Ah LiFePO4. I don't understand the dip switch setting. Advice please. Spec below.

I bought one, it's runs Nespresso machine well with no issues.

Can't find any videos so I'll ask here, does Delta 2 run Nespresso machine OK, (UK, 240v), thanks in advance.

I understand the current limits, I asked Bluetti the question because some campervans have 2x150w panels and would it be ok/safe to charge the EB70 with potentially 300wats.

I think you can put more than 200w into EB70 according to Bluetti technical as long as it doesn't go over the 28Voc. That is what they are telling me, they say I can use 300w panels as long as I don't exceed Voc.

Update, I went for the EB70. They were reduced in sale, additionally I found a £80 GBP discount code that worked. After a couple of days I called and emailed. The EB70 was miraculously expedited/delivered the following morning. It's great and a better screen than EB1500. I also bought a 12 to...

Anyone in the UK having issues with purchases/order not being fulfilled? I bought some leads and then a EB70, waited and waited. No contact. Tried emailing and cancelling, still no contact. Makes me edge towards Ecoflow but as of yet no Delta 2 units have landed in the UK.. Amazon delivery...

I had a reply from Bluetti and thought it might help others in future searches. Thank you for your email. Yes, it is. T400 AC adapter can be used to charge Bluetti EB150 and it will be more quickly. Please click this link to get it.

I found this on Poweroaks site, it sounds correct???

Here in the UK the brick/adapter charges at about 216watts whilst plugged into the mains (230v), is there, or has anyone found a quicker way to charge these. Particularly when away in a camper.

Can the Delta 2 be charged with solar and 12v in a campervan at the same time. So charged by solar whilst parked and 12v with the engine running

Is there a better-faster charger which I can use, the UK mains 240v model charges at 216w. I'm sure I read somewhere that there is a more powerful charger

Yes, I have the manual. however once plugged into mains power it's OK and always has been. It must be the Poweroak?

If I'm away in my camper and don't get much solar I want to be able to charge my house/sprinter AGM's with the Poweroak EB1500, however when I use the CTEK MXS 5.0 I get a red error light (it does work on mains). When I use my other CTEK MXS10, it works fine. Both chargers are AGM compatible...

The most I can get from the DC050S is about 119watts from the battery, with the engine running. This is better than 85watts from the cigarette lighter with engine off. No matter what size leads I use, I did plu in a 300w panel and managed 270w input which is better than the UK mains adapter. I...

Just opened this folding solar panel kit from panel It has a strange misting to one cell.

Thanks, the switch I have is rated at 50v, 200amps but is the third position type. Why can't I use this because it was expensive and bought a while ago.

My house or Sprinter battery is 12 volts, I've been told that I can't share the solar between two MPPT's The reason my solar charger is a 48v is because the only panel to fit my roof was SPM042152400 Could I use a battery switch to switch the + solar to two different sources (van MPPT and...

I have a camper van, with Victron SPM042152400 and 100/20 48v, this charges my house battery, I also have Poweroak/Bluetti EB1500. What would be the best wat to charge the power station from the solar, my plan was to use "Y" connectors and then remove a fuse going to the + input on the MPPT...

fabiangomez I'm no expert but would one of these sort out your problems, I use it connected to my engine battery. I think you can input more solar too. D050S

Cigarrette lighter socket XT90 to battery Engine running(XT90). Mains UK, (240v).

Yes, I confirm also that my wall charger inputs 216w constantly, (220-240v) UK voltage, I've also bought the DC050S which inputs about 119w, which I'm trying to improve by direct connection to battery.

Will I get more power and more watts, if connected directly to the battery with the engine running compared to the cigarette lighter which got warm after a few minuities.

Thanks, I think I'll have to stick with XT90 as that's what the (DC) unit accepts.

I do need advice, I'm a complete novice. I have the Poweroak/Bluetti EB1500, I wanted to charge it whilst on the move, I bought the DC050S which isn't available in the UK, so got it from Germany. I tried it quickly, it does work? It charges at 100w and 120w with engine running, the cigarette...

Novice question, do lithium batteries benefit from and kind of cycling from new to improve performance, namely the battery inside Bluetti EB1500. Thanks in advance.

I hope this helps others, I just had a email from Poweroak China. "Thanks for being interested in our new products. Of course, it can to be used to charge EB150, but it's estimated to be released in the next year in UK. You can follow up our official websites to get the latest updates of the...

So, I've bought the eb1500, I can charge at home and charge with solar. What happens when your on the move, how do you charge from the vans 12v system. I have a 180amp alternator (Sprinter). Any advice would be welcomed. I've just found mention of this DC charger, is this what I need to...

If I disconnected the 12v out of Victron would this be OK, as disconnecting mc4 every time would be a pain. I do have a 80w 12v folding panel. Only downside is this needs doing up whilst stationery. Is there a way to charge EB150 from engine?

I'm building a camper, I have a Victron 215w 24v panel on the roof which goes to a MPPT (Victron 100/20/48v), this charges an AGM easily. I also have a Poweroak/Bluetti EB150. My question, can I "T" into my solar cables and share the power between units (MPPT and Poweroak). Can I use "Y"...