MisterB1959
Solar Enthusiast
- Joined
- Oct 22, 2022
- Messages
- 355
@houseofancients
@SeaGal
and anyone else UK based who may be able to advise
Sunsynk 5kw ECCO Hybrid inverter installed in an outside utility
UK ring main in house
I am looking to have an essential circuit in case of grid failure. The circuit is an existing UK ring main. Would I need one Finder 62.82.8.230.0000 relay or two (one for each 'leg' of the ring main)? I understand there is a delay built into the Sunsynk before the UPS is 'live' but if the grid comes back on, would one relay be sufficient and operate quickly enough or would I need two relays, one for each 'leg' of the ring main. The relay(s) will be fitted adjacent to the consumer unit, BEFORE any sockets are supplied.
I will if course have an earth/neutral bond installed at the same time, adjacent to the inverter.
Although I will use a competent person, I still like to understand how it all 'integrates' ...
Thanks for reading
@SeaGal
and anyone else UK based who may be able to advise
Sunsynk 5kw ECCO Hybrid inverter installed in an outside utility
UK ring main in house
I am looking to have an essential circuit in case of grid failure. The circuit is an existing UK ring main. Would I need one Finder 62.82.8.230.0000 relay or two (one for each 'leg' of the ring main)? I understand there is a delay built into the Sunsynk before the UPS is 'live' but if the grid comes back on, would one relay be sufficient and operate quickly enough or would I need two relays, one for each 'leg' of the ring main. The relay(s) will be fitted adjacent to the consumer unit, BEFORE any sockets are supplied.
I will if course have an earth/neutral bond installed at the same time, adjacent to the inverter.
Although I will use a competent person, I still like to understand how it all 'integrates' ...
Thanks for reading