frankz66
New Member
Hello everyone, being inexperienced I wanted to ask:
I have a string in series of 4 12v monocrystalline panels with the following characteristics :
Technical Data] Rated Power (Pmax): 180W -- Max Voltage (Vmp): 19.10V -- Max Current (Imp): 9.43V Current (Imp): 9.43A -- Open Circuit Voltage (Voc): 23.20V -- Short Circuit Current (Isc): 9.99A -- Max System Voltage: 1000VDC System Voltage: 1000VDC --
I have seen on offer of 170watt panels so 10 watts less with the features attached in the photo.
If I wanted to mass-proize these other two 170-watt panels being the VOC tolerance and ampere do I do well or do I buy two other identical 180-watt panels?
I have a string in series of 4 12v monocrystalline panels with the following characteristics :
Technical Data] Rated Power (Pmax): 180W -- Max Voltage (Vmp): 19.10V -- Max Current (Imp): 9.43V Current (Imp): 9.43A -- Open Circuit Voltage (Voc): 23.20V -- Short Circuit Current (Isc): 9.99A -- Max System Voltage: 1000VDC System Voltage: 1000VDC --
I have seen on offer of 170watt panels so 10 watts less with the features attached in the photo.
If I wanted to mass-proize these other two 170-watt panels being the VOC tolerance and ampere do I do well or do I buy two other identical 180-watt panels?