diy solar

diy solar

Quality brand for crimp connectors, etc.? E-Volt is out of stock...

oldmancharlie

New Member
Joined
Aug 21, 2021
Messages
12
Hello,

As the title says, I'm looking to order good quality crimp connectors (ideally a big assorted box), same for heat shrink connectors, solder seal connectors, etc., and the brand recommended on this site's resources, "E-Volt," seems to be put of stock...

Can folks recommend a quality brand for these connectors, and is hopefully a one stop shop for S/M/L terminal connectors (lugs), etc. Basically I have some odds and ends but want to fully stock this part of my shop.

Thanks!



Charles.
 
If you are asking about Red, Blue, Yellow ring and fork terminals for 10AWG to 22AWG, AFT Fastener has had good pricing in the past.


I put together a kit with various sizes for my shop as well. Word of caution, it seems many of the premium products even from 3M etc. have started to substitute copper for brass when there was a shortage. Make sure to read the description of the item before ordering.
 

Attachments

  • Ring Term 1190 Inside.JPG
    Ring Term 1190 Inside.JPG
    140.4 KB · Views: 0
  • Fork Term 650 Inside.JPG
    Fork Term 650 Inside.JPG
    131.5 KB · Views: 0
Back
Top