What's in your sled when you head out?
I like to carry...
110v smart victron charger and Honda gen (currently in shop)
Network gear, travel router, laptop
DC bus cable, ring terminals and crimp tool
Spare tesla model s modules
Plato wire cutters and zip ties
1+1 spare multimeter with batteries...
Is anyone familiar with the battery modules BMSs from a Tesla model S?
these are 5.3kwh modules running on SimpBMS.
REV A module board, says "PCBA, BMB, WIRE-CLIP"
When simpBMS put the pack in balance mode, the lowest two cells of one module begin to jump up and down. (cells 10 and 11 on the...
Repurposed my kilovaults for a on grid ups/backup for home heating system.
Doing wiring, sitting here and just realized that with no current on them, they are going to shut off and will not be available when the lights go out and the victron multiplus ii tries to pick up the load.
Any thoughts...
There are plenty of sites that say how many watts various appliances consume based off the electrical data plate.
"Toaster 700 to 1200w"
They often have pretty large range as it covers a large set of models, making it rather less useful for anything besides peak inverter sizing.
I'm...
I have a 100 Gallon vertical propane tank. I am unfamiliar with the valves on these larger tanks but have seen videos of people refilling their 20lb tanks from them. I'm hoping one of these valves connects to the liquid withdrawal tube but not sure if this tank has that. It does not look to be...
Looking for recommendations for a charger
120VAC to DC
For 6s Li Ion (tesla modules in parallel with external BMS+balance)
Adjustable voltage between 24 and 25v
Something in the 50 to 100a range
The victron AC chargers do not go low enough in the app settings. Almost ran into trouble with this...