diy solar

diy solar

Most reacted threads

  • Solar Generator grounding loop?

    I have an EF Delta 2 Max wired up to solar and powering a few house circuits of 120v-only loads via a Reliance ProTran 2 transfer switch. This allows me to offset some of my electric consumption and reduce my electric bill. Is it ok to have the AC charge port plugged into grid power so if I run...
  • Providing 200A service to the service panel via EF/Bluetti

    I recently saw the video of 8 Bit Guy powering his home with 2 EF Pro units to provide 240V service but it was via a single 30A breaker to his service panel. This limits to 30A so although you can run your electric dryer and electric stove you can't do that at the same time and you have to be...
  • Wire ripped out of panel junction box

    I ripped a wire (or lead) out of the junction box crimp. I'm not sure how to reopen the crimp so I can reinsert the wire. I tried sticking in a flathead screwdriver and twisting it and some needle nose pliers but it seems to agitate the thin metal that's actually connected to the panel and I'm...
  • 5-20p to L14-30R for Ecoflow Delta 2 Max

    I tried plugging the Delta 2 Max into my Reliance transfer switch https://www.electricgeneratorsdirect.com/Reliance-Controls-306CRK/p50917.html and no power comes through to the switch. I used this cord: https://www.amazon.com/gp/aw/d/B08CN39FG6 There is a green light on the cord that...
  • Why are there micro and string inverters instead of just wiring PV from the panels to the main inverter?

    I've been searching a lot to try and understand the reason for micro and string inverters and I see a lot of comparisons between the two types but I can't find anything that explains their purpose. Some things I have discovered as a benefit but not necessarily a reason for their existence...
Back
Top