Most reacted posts

So i have 2x EG4 3000EHV-48, wired in a split phase (220v [L1-110v/N/L2-110v]) config into an Critical loads panel. Was sized based on what i use and typical loads stay around 1.8-2kw , but have peaks that go to 4.5. All works well (mostly). I have found that one of the inverters always has a...

well went the easy way and just balanced the load circuits manually. DID try an auto transformer , but that made no diff. for now one leg gets 100W more than the other , which is ok and lets face it can never be truly balanced. and even in load with everything running they are 300w offset.. I...

Am interested . could take 8

I do have grid input (split phase between the inverters - each on a 110V leg) ) . AIOs are setup in SBU mode with switch to Utility set at 30% battery ( to be offgrid as much as possible yet have backup) . So isolation transformer seems to be what i need -right ?. Is not using the neutrals of...

Following.. am having problems with the closed loop comms.. the LL-S always go into fault mode and trips the Breaker when connected with the LL battery comms..

I already have 3x EG4 LL 5.12 KWh batteries ( 15.3KWh capacity) and am looking to add more capacity . Really looking into the BigBattery Kong/mammoth - due to space and the need to add another next year . wondering if i can use the closed loop communication between the inverter and these...

will be upgrading to a 6 slot. so looking to sell my EG4 Enclosed Battery Rack 3 Slot with wheels . Minneapolis, MN area. fairly new , had it for 3 months.

sent a msg