cdsolar's latest activity

Ok, for the MNEPV DIN Rail breakers, these work well as lockouts. Note the pins face inward: https://a.co/d/cFp9ndP and for the MNEDC...

Go to them in person and ask: "I am looking for 400W bifacial panels (Or whatever specs you need). What ones do you have in stock, and...

OMG!! STAFF ANSWERED!!! :)

If you can find other of their customers that have the same issue, you may have a better case. Not sure how you would do that.

https://community.victronenergy.com/questions/276562/why-does-my-scc-disappear-in-vrm.html

I just want to be clear that this is a clone to new folks and others who otherwise might not know the difference.

Not sure if you are intending humor, but I see that you say you are in Florida. Please buy genuine Victron from a US distributor. It...

Not for me on my CCGX Settings -> VRM online portal shows last contact value. Mine runs every 60 seconds and when I refresh the...

I'm using a Raspberry Pi and Venus OS. I just did a firmware scan and when I switched to dashboard the charge controllers were not...

Can anyone confirm whether this happens in their setup with a VE.Direct SCC, either with a pi or true Cerbo?

Ok, I now have a reproducible case. 1. I have 150/35 solar charge controller (SCC). 2. It connects to the pi using a VE.Direct USB...

It's either the MPPT, the cable or the RPi itself. Does it the RPi have any power saving feature on the USB port? What's your logging...

I use a 1m interval, and when I'm live viewing VRM, I see "realtime" and not "updated x min ago" Maybe give 1m interval a shot? You're...

This is old, but I am not the only one...

If I see it again I'll go to 1 minute. I may also swap USB ports and/or cables. I may ask the same on the Victron Community. Note...

5 minutes is my interval. The other devices never disappear. And in the instance shown, the charger showed up in about 2 minutes. I...

Twice now, since I started my system, the Solar Charge Controller, "PV Charger" in VRM, has 'disappeared' from the VRM screen, then...

https://www.victronenergy.com/upload/documents/Datasheet-MultiPlus-II-120V-EN.pdf These are also chargers (from AC).

Not necessarily. You won't find much about my system in my profile. It's all in my build thread. And some of my recommendations are...

You can connect to your Cerbo through VRM and get that screen and change your system config as well, as if you are local. But, there is...