CRenner's latest activity

Thanks

Hi all, I'm confused about this 1:1 rule and the size of my system. I have 18 400w panels. But each has an IQ8+ on them. So max output...

A thicker slab would get more mass.

Check the details on the sticker of the panel. Mine has a 225 bus bar.

Do you need AC coupled checked if using the gen port?

Would you run it at night on batteries or would it hold the heat from daytime?

Before I found this site, I had an AC Coupled system installed. It has micro inverters that output 100%. When off-grid, you add an AIO...

One way of testing is to go out to the garage and turn off the main breaker, if the house stays on it is a separate system. The basement...

Do both 200A services go through the Main panel in Garage, or does one go straight to the Old Main? Is the main breaker in the garage a...

I thought an off-grid inverter could not feed back to the grid?

When you are grid connected, the AC Coupled circuit can put out all the power it can produce because you have the grid to feed back to...

Thought he said he wanted move it "to a breaker in the grid tie panel."

Does your inverter frequency shift? If not, that could hurt your off grid inverter.

That is good to know, thanks.

I only have 3 so not an issue, but, I thought the 20kWh was per battery. EG4 and others sell 6 battery racks so the issue would be wide...

Yes, in true AC Coupling the inverter would reduce the Enphase output. The Sungold IP6048 can not do this, that is why it is false...

Yes it is doable. Do you have any solar now? If not you could use any of the Ecoflow type units.

Alisa quit responding so I guess my choice has been made for me.

Yes, looks like separate systems tied into one combiner. I was hoping for a tax credit to buy more. Someone said you can't take the...

In the video by Everyday Dave, at 22:02, you can see on the right, he has PV connected directly to it.