Recent content by crozen

Well, i don't want to make an off grid but i was wondering if there is a way where i can use that inverter and also store energy on the batteries and powering the house from the batteries too.

Yes, but the inverter should be connected to my battery pack, right ? So this 100V DC input should be for the battery pack... Or am i wrong ?

100v ?

Hi guys. I have a very interesting second-hand solar panel kit for cheap. I have some questions. I want to store the energy in my battery pack 12v but i can make it to 24v. The big problem is that the inverter has a minimum DC input of 100v (220v nominal). The kit is huge : 24 panels of 235W...

Should i do a top balancing of the 3 cells and the super cell too ?

I have a cell of 50Ah capacity (not new, real capacity is 45Ah). This wiring ? At least, all to 3 others cells will now be used at full capacity right ?

You are right. I see what you mean.

Hi, I have a LiFePO4 4S 12V "100Ah". One cell has much less capacity than the others. It has 70Ah while the others 90Ah. I'm fine with it but i was wondering if i could do something. I know that the best solution would be to buy another cell with more capacity. My issue is that the weak cell...

No, is a said it in my previous post, the charger destroys your cells !! because they are putting too much heat... For example the cheap Liitokala S8 charger has 300 ; 500 ; 700 ; 1000 ; 2000mA current. 300 mA for an AA NiMH is ok but when you try to charge an AAA 800mAh capacity with 300mA, you...

What do you think about the timer ? If i charge a 5.8Ah cells in parallel at 580mA for 10 hours, Is this a good indicator to stop ? How reliable is it?

Here is my final feedback. When you can't set the current yourself in a smart charger, this is so bad because you are not charging the battery at C/10. I think that is why my batteries were so hot in the smart charger because of too much amps delivered (C/2). As we know, there is a thermal...

Do you mean that there won't be a drop in current when the voltage reaches the one I set ? The same as on lithium/lifepo4

Hi, 1.a) Can we also charge a NiMH cells with a bench power supply as a lithium cells ? I put 2 AA and 2 AAA NiMH (2500 + 2300 + 800 + 800mAh) on charging in parallel. They all were empty. I'm charging them on constant current at 0,350mA (so 1/10 capacity) and i set a maximum voltage to 1.55v...

Hi guys, I have a basic question. When a switch is rated for 30A 250 VAC max, how do you calculate how many amps can it handle for 12V DC ? If i go for 250*30 = 7500W There is no way that the switch can handle 7500/12=625A. So how do you convert from AC to DC about the electric current ? Thnx

i showed them all the pictures, but that was their answer. I also have put the link from this thread to show them what we are talking about.