Most reacted posts

Great info thanks!

this is helpful, thanks. was there any update since this post?

Its only $4 savings X 4 , so i would only get a $16 refund, if I kept them. Assuming they are all quality cells , Ive read that the 280Kv3 (with octagon) will perform near 300Ah on average. Is this true? Vs a 304 performing near 315Ah. Is this true? if so its about 15Ah difference and a $16...

I just got shipping label to return the 280Kv3 , I think I will proceed inorder to get the 304. Hopefully I get some good quality 304

I just received some "Grade A EVE LF304" from 18650batterystore. Thoughts? Pics below... They look to have the hexagon/octagon base. (Im not near them to confirm 6/8 sides)

Anyone?

I spoke with them just now. They agreed ship them back , and will replace with 304 cells. Still dont know if it was accidental or intentional.

I thought about 3/4 but 1/2 is plenty strong in this size box

ANy help appreciated... These are supposed to be Grade a EVE LF304 form 18650 recievd acouple of days ago.

See below... Im designing a custome box for 4x LF304 out of 1/2" plywood. I plan on leaving an air gap beloe the removable top panel and the side walls to allow heat to escap. Currently I have a 1/4". Is this enough? Is it even nessecary? Lets assume I might use the full 150A worth that the...

My question is regarding the base undeneath the terminal. From what I have found is that the LF304 normally have a round base wheres the LF280K V3 have an octagon base like what I have. So Im wondering If i got sold LF280K marketed as LF304. Or if they changed to the octagon base on the...

For those still talking about the mechanical strength of 1/2" , the box will be contructed using SS all-thread passing through the end plates, not screws at panel edges. At the bottom will be SS Tnuts with a long SS bolt passing through the top panel. I 100% gaurantee it will be stronger than...