EG4_Jared's latest activity

I would refer you to this link which goes over the variety of configuration options with UL9540...

The 6000XP would be limited to 3000W per line. With this being very close to the max output, I believe this would be normal.

Shia, you've provided more information here compared to the Smal Cabin forum here I mentioned coming here for more help. Now that I...

Could you DM the serial number for your inverter so that I can take a look at the data? Also, changing the RS485 protocol to the wrong...

That would be fine. Also, as mentioned 10 panels in series would work as well if you had the space.

Is CAN communication being used or RS485. Also, what lithium brand is selected?

If you do have any further questions, feel free to reach out!

Welp, looks like SA is not accurate for battery draw. Daly BMS's show 0 Load on the batteries while SA shows 500. Guess I need to work...

If you don't mind sharing them on this thread, I can take a look for you.

Okay, closing the loop on this one! Finally got a chance to flip things and we are good to go! Thanks all for your help!

That would be correct. It does not cause issues every time, however, we have seen that some third-party applications have caused the...

Glad to see that this worked for you, and I definitely agree about the instructions being essential. I will be reaching out to our team...

Rooftop PV has caused a number of fires, perhaps most famously seven Walmarts with Solar City systems (now owned by Tesla.) After the...

Could you DM your serial number? I want to look at the data.

It does come disabled by default. However, it is an extra layer of protection without many cons. If I would say a con to this setting...

@Markus_EG4 @EG4_Jared I have a new feature request, if possible. Under forced discharge, can you allow the user to enter different...

Does this give you the additional battery information on the monitoring site? If not, the PowerPro/inverter may not be on the latest...

You may be able to find something with the NABCEP directory...

It might be the case. However, if using lithium brand "1", ensure that the PowerPro is configured for CAN EG4/LUX protocol and not the LUX.

Also, confirm the voltage of the battery is not exceeding 59.5v, which would prompt the Bat Volt High.