Recent content by GregM

Best packaging I have seen in years. Batteries are double boxed with foam inside the inner box. The cart is single boxed but has foam edge corners between the box and cart. It is held (screwed) to the pallet with an interesting steel bracket on each foot. No dents bumps or scrapes on anything...

Received shipment Feb 28. 2 Pallets.

This fuse arrived and box said 300A, but when I looked at the body of the fuse it says 200A. Returned When they issue the credit I will buy the Blue Sea fuse block with matching fuses in 300A

Getting ready to lift the silver horizontal pole (sitting on the orange jacks) up to the top of the vertical poles and bolt it on.

Thanks for the help guys.

Blowing up the microscopic print on the PDF file for these panels show a notation of Installation Holes on the 950mm dimension. I guess those are the ones I want to use.

Using the 950mm dimension would give a spacing of 37.40157" of the XR1000 mounts.

On their drawing it shows 2 dimensions between what look like mounting holes on the back side of the panels. One is 1300mm and the other is 950mm. Subtracting that from the overall dimension gives 15.84646" from either end and 8.956695" from either end. Measurement with a tape confirms these...

I'll have to check that out. Thanks for the suggestion.

I am using the Ironridge ground mounting system. The panels are 40.86614" x 69.09449". I can't seem to find a measurement that tells me how far in from the ends of the panel the XR1000s should be. This would be the 69.09449" overall dimension. On their drawings it looks to be around 12" from...

Try their welding cable

Take a look at these guys.... Wire and Cable Your Way

What did you replace them with?

No doubt. I just wasn't expecting it because they have an office in LA. I guess when you place the order it goes outside the US and they give it to their office in the US or wherever.

Just a heads up... My credit card shows a FOREIGN TRANSACTION FEE - MERCHANDISE – $59.75 for my Ruixu purchase.