LakeHouse's latest activity

Yep. And I'm not saying you should necessarily go with an AiO (I'll be installing a separate SCC to take over that function of my AiO)...

They won't do anything useful. What you're probably thinking you want them to do is stop one shaded string from pulling current from...

This question is phrased a little strangely... Solar power from the SCC can power the inverter and if there's more power available than...

Yup. There are two good lessons here: 1. Making power is hard, unless you’re in the business of fusing hydrogen into helium. 2. The sun...

6.1A max at point A in a short condition. Regardless of which of the four panels fails. The string with the failed panel doesn’t...

Sounds like some sort of protection mode. You said the app reads fully charged, but I’m inclined to think it might be wrong about that...

This is gold!

here is what you need to know about conspiracy theorists, they don't exist "a hypothesis is constructed before any applicable research...

Exactly. And if ‘they’ (presumably oil companies) knew about it and were keeping it from ‘us’, they would definitely be using it in...

And here you are on a DIY solar power forum spreading ‘The Truth’, like you’ve got some sort of death wish. 😂 You’re either a moron...

Yeah, as above: what is high voltage to you? I also run 48V nominal and I think it was the right choice. I see lots of people on the...

For me it's cell number 8 in a 16s pack, so I guess that makes me the 1% and there are 99 batteries out there with a first or last bad...

There's a discussion of semantics here that I'm definitely not interested in having. But the at the very least, the BMS shouldn't...

If you disconnect the center bus bar, you now have two separate batteries, but the BMS only has the ability to disconnect one of them...

That’s not an MPPT controller. From the Amazon description: I think someone on the forum has a rule of thumb that if the SCC has a USB...

No, the VA ratings are independent of the input voltage. Your 24/500 is built for 500VA only, and I think the continuous rating in...

Generally, series connecting multiple LFP batteries together is not recommended. Not that it can't work, but you need to start with...

The voltage shouldn't change from 222V. You still have 6S, so voltage is 6 * 37V = 222V. Current will double though because you now...

Maybe you could elaborate on what you mean by this? There are two main things (each of which can have some confounding factors) you need...

Ignore the dc aspect. Look at the voltage drop. At 222V you lose 5V with #12. Negligeable. Those charts are for BATTERY voltage losses.