I’m currently doing a top balance on 16 280ah cells. I have the cells in parallel and before I started the cell voltage was 3.27. The power supply is set to 3.6 and the amps haven’t gone down in 2 days, 48 hours. The amps are sitting at 5.6 exactly and the test started around 6.34 amps. Am I...
Hi guys. I have a new lv6548 hooked up and no matter what setting I put it on, it will not pull
From the batteries when the grid is connected. I want it to pull from the batteries and solar first. Then once the batteries die and there’s no solar I want it to pull from the grid as a backup. Does...
so i have a 48v battery bank with 16 3.2volt 280 amp hour cells. one time before cell #11 died before the other cells and would also charge faster than the rest so i changed it. everything was fine for a while until it started happening again. i changed in out again with another new cell. i...
Hi guys. So I bought a LV6548 and I am getting ready to install my new santan 250w used panels on the roof. I’m going to run 2 strings into the LV6548 both of witch will be hooked into a metal shutoff fused with 30 amps. Also I plan on grounding the metal shutoff to my grounding black outside. I...