Most reacted posts

Any good product suggestion on that respect I've read that some make more mess than they should and actually the result is opposite to the aimed objective (e.g. worst contact / higher resistance / ..)

@LydMekk FYI unless you need fuse monitoring.. How to Add Fuse Holders to a Victron Lynx Power In

yes agree, but we were talking (see post above #10) about copper / aluminium interface in a "salty" environment (e.g. near shore) I saw upnorthandpersonal pointed to that resource which imho appies also to the above conditions -> antyox and avoid aluminium erosion beeing cells battery terminals...

yeah 8xxx Alu i confess i don't know which alu the cells terminals are made of, good point have searched a bit in the forum but didn't come to a conclusion

I agree with you those are very nice (i had looked at them myself) ..though the price tag (in Europe at least) is near prohibitive...

that's the plan. I was considering plated bars (tinned / nickel plated as i'm close to the sea) though pretty hard to find..

Ok thanks, will remove the one on the Batteries Bus Bar Sorry for the confusion on the DC load side i just reused the picture. That's gonna be a DC/DC converter not an MPPT indeed Thanks

Are you ref to the Batteries bus bar ? That's a 30x10 section copper bar in the plans I reused the MPPT picture (sorry for confusion) but that is a DC/DC converter for DC loads Each battery can potentially run alone (e.g. at the begin there will be only one) Planned current draw is ~ 160 A...

Updated chart

I'm in the same spot as you. I only find super-uber expensive (and 3 pole) MCCB in Europe... Shnider has (had) one 2P (pretty exp too) which is going to be discontinued in May... ...an the Ali counterparts like this... 2P 125A MCCB i'm not sure to trust.. Had you managed to find something ? Thanks

Hi all, while looking at the different BMS brands / options for the system i'm currently plannig upon i stepped into this option as well Elerix Celle Performance Monitor (quasi BMS) CPM in short It's not a regular BMS (like e.g. JK and co.) as the current is not flowing through it. Couple...

For info

thanks for the manual, i had seen this BMS by chance couple of weeks back following out of a curiosity most of their production so far went to india

..in EUROPE thought..

I've come across their offerings on another angle. I was looking into solar panels and In Italy those appear in the offereings of some official import shops The panels have on paper a good price per Wp ratio So i did question myself the same Q as yourself... who are those guys ? I've only been...

Hi, recently joined this wonderful forum :) I've spent some time already reading threads on the subject, the very useful filterguy's guides and Victron's "Wiring Unlimited".. i've made a sketch of my plan for the DC side for my project. While i was initially thinking to use MCCB(s) on the...

I thought the same There are actually two models that could be worth looking into Gobel RN150 BMS (150A) Gobel PC200 BMS (200A) There seem to be zero documentation though on either..

That's what i noticed as well in many of their products pictures around the web... shops included So i decided to ask them directly.. "how come?" They confirmed (see above reply) the switches (marked 48VDC...) are fine for our Lifepo4 battery usage I'm now considering those in my plan instead...