Recent content by Offgriding

Do you Iike/ recommend the touch screen?

Thanks for the photos. I'm looking forward to testing the jk. Do you use the switch to activate them?

Thanks everyone for all your replies and advice here. Skypower, you read my future correctly. I have a jk inbound. 🤣 If anything changes and I get this red piece of crap working I'll be sure to let you all know ✌🏼

Quick update. The app connection issue seems ok now after shorting two pins as described in another thread. Pic below The discharging issue remains. I'm starting to believe this bms is a dud. Any further suggestions very welcome. Thanks

Pics below

Hi guys I watched the above vid which describes not receiving 3.3 volts across green and black wires of usb plug. Mine has voltage here but none across the other two wires, red and white. Would you think the fix described in the video could work but with the white instead of green. When I test...

I just connected the charging and bms connects to app straight away. It looks like discharge switch is on

Hi Yes I am pre- charging the inverter. No fault alarm, no nothing. I might try reconnecting the charger to see if it will connect to app and check discharge mos. I thought I checked it but won't hurt to double check. Thanks

Totally agree! I have 2 x JBD units. 1 58v on an ebike and another 12v on portable battery power station. I also have batrium on my 48v system which I'll be recommissioning soon. I've never had issues with bms before this. Has turned me off Daly that's for sure. I purchased it from the daly...

Hi The battery is definitely ok, as mentioned above the pack voltage is 13.75v. Wiring checked and rechecked. When the bms was connected and charging, voltages and current we're correct. The issue appears when trying to discharge the battery. The app won't connect and voltage is between 2-9...

I can't even get sufficient voltage to P- for the inverter to start or to power a small dc load.

Yes, sorry and thanks for your reply. The BMS disconnects from the app, the DL- number is still listed but won't connect. The voltage at P- seems to fluctuate between 2-9 volts. Cell voltages around 3.45. Pack voltage 13.75. No error codes, faults or warnings that I'm aware of.

Hi all, This is my first post on the forum. Thanks for having me! Unfortunately I'm not a happy camper ATM. I purchased a Daly 150 amp 4s bluetooth BMS in 2021 from aliexpress and just getting around to connecting it now. Probably one of the most frustrating exercises I've ever undertaken! I'm...