Most reacted threads

I know this is something that my electrician will probably be able to assist with but I’m really keen to get my head around it before he comes over. 5.5kw Sunsynk Hubrid inverter and 15kw Seplos Mason 280 box are being fitted in the garage. Feed from home consumer unit to garage is a 2.5mm...

Has anyone come across this previously? I’ve downloaded the battery monitor software, uploaded the right profile and logged in using the admin log in. First thing I notice is that the diagram at the top doesn’t seem to look right I also only get this screen with all the data for about a...

Afternoon everyone. I’ve used the forum quite a bit for reference without previously joining, however I’ve now bought a Seplos Mason kit and and I’m currently mid way through the build. The lack of instructions has made it a bit of a challenge but it’s all pretty straight forward. I have come...

Hi Just a quick question on fuse / isolator requirements for my Seplos setup. Below is a basic line drawing of what I’m planning to set up. I’m not sure if I need anything else between the battery and the inverter. I have an isolator which sits on the live connection as per below. This was...

Hi all Just looking for a bit of advice around extending my CT cable on a DIY battery only installation. I’ve had to run armoured cable from the meter box under some patio slabs (path) and then into the garage. I’ve run shielded cat5 alongside it as I was advised not to bury the CT cable...

So I’m back again with some questions. The main one being ‘have I managed to break something’! So the story starts yesterday morning when I needed to charge the car using the granny cable (in a socket in the main garage board, wired into the house CU). I didn’t want to drain the battery so I...