12kW inverting / charging
3 x Victron Multiplus II 5000VA in 3-phase configuration
10kW solar array
12 x 270W Jinko coupled with Victron Smartsolar 250/60
12 x 280W JA Solar coupled with Victron Smartsolar 250/60
8 x 410W JA Solar coupled with Victron Smartsolar 250/70
25kWh 8kW storage...
To add extra protection to my DIY 48V 560Ah battery, I was thinking on adding a low/high voltage disconnect, controlled by the Batrium BMS.
Question 1:
I noticed that a lot of people recommend the Gigavac EV200/GV200
Here, €125+Shipping...
Regarding this video from Will:
I also have a Tesla Model S. Additionally, I have a Victron Multiplus II 3000VA + 3.2kW PV with a Victron MPPT 250/60 + 5kWh BYD 48v battery.
What do you think of these 2 alternatives to extract energy out of the Tesla’s 12V system, and seamlessly into my...
This is how I plan to connect 32 x 280Ah LFP cells, into a 48V 560Ah battery. The cells will be assembled into 2 server cabinet shelves.
95% of the time the battery will be pushing <50A. And 99,9% of the time it will be <150A. Having said that, I would still like to dimension the connections for...
Right now, I have a working system:
Victron MultiPlus-II 48/3000/35-32 (to be upgraded later on)
3,3kW solar array, connected to a Victron Bluesolar 250/60 MPPT (to be upgraded later on)
Victron Venus GX
BYD 5kWh battery
I'm swapping the BYD battery for a big DYI battery. To do that, I’ve just...
I was incredibly unlucky (aka dumb) and flashed a ESPHome binary, destined to an ESP32, into WatchMon4.
After realising my mistake, I was able to successfully reflash WM4 with the correct firmware, using the Batrium tool.
I'm now able to connect again to the WM4, via USB or WIFI, using the...