Sennen's latest activity

That's for the whole day, not any specific time. The daily view shows you 5-10 minute snapshots

This shows a 1 hour gap in the production logging But the daily is correct

I'm hoping with the increase of prevalence of 51.2v batteries, the other components of matching spec will increase in availability.

My Solark has terrible gaps in its data when I go to their site. SolarAssistant keeps better logs

Specs seem to indicate 600v. Doesn't indicate AC/DC, but the DC32v ones are usually 250vac...

For this 1a load, i think a standard house switch would be okay if it's fused before the switch

They seem to think it will be much cheaper to produce than current panels, too. https://www.nature.com/articles/s41467-024-46620-1...

does your battery have a current limiter? a cutoff switch at the battery?

Solark 15k doesn't have a cutoff on GRID. There is a DC breaker and LOAD breaker, but no GRID breaker. I'd ask for clarification, I...

Spinning != Working Could be spinning too slow to make meaningful air movement

Ain't got no gas in it... Only thing I can think of is the reset button. All breakers are off in your picture, though. Might need...

Unit is 5 months old, replaced entire air conditioning system with an inverter system, no longer need soft start. Also no longer need...

Your 4000W is 166 amps.

Fuses are rated for amps. How many volts at that 4kw?

I grounded the EG4 battery rack to the main panel with 6ga on a loop connector into the back rail. Plugged an extension cord into a...

Should fuse from Bus Bar to Load. Base that on the inverter's max draw. (Example, Solark 15k will pull up to 275a; Wire and fuse would...

Curious if you could put a switch in the house somewhere to make the pump more on demand. Also curious if a mini water tower would save...

My current install This amp rack under the seat (JL Fix 82 removed now as i replaced the head unit) Driving a custom built fiberglass...

I had the mrbf on my setup in the beginning. They started getting noticably warm over 100a. I've swapped to class t fuse and that's...