Sorry I accessed it via parameter view and edited nominal capacity to be 280ah and it has reflected... @MisterSandals
Screenshots of app showing cell voltages and settings please.I have encountered a new problem the BMS keeps clicking immediately I turn on inverter? Please what be the cause and solution for this?
Screenshots of app showing cell voltages and settings please.
Did you use a precharge resistor?
Screenshots of app showing cell voltages and settings please.
Did you use
No I did not use a precharge resistor.Screenshots of app showing cell voltages and settings please.
Did you use a precharge resistor?
I just replaced the bms without removing the wires from the battery, just the the harness connections and everything is looking g fine now with the new bms..Everything looks normal.
Did you use a precharge resistor?
Inrush current to charge up the capacitors could be damaging the BMS.No I did not use a precharge resistor.
The inverter was burned due to overload issue, the electrician upon opening up the inverter showed me the burnt mosfets.
So I bought a similar inverter and connected it and then immediately I turn on the inverter the clicking sound from the bms starts.
Okay thanks for pointing that out...Inrush current to charge up the capacitors could be damaging the BMS.
A precharge with a resistor is never a bad idea.
Wait so their capacitors on the bms?Inrush current to charge up the capacitors could be damaging the BMS.
A precharge with a resistor is never a bad idea.
No, in your inverter.Wait so their capacitors on the bms?
Okay, yes the new same JBD BMS works well with the new inverter, thanksNo, in your inverter.
Is everything working with the new BMS?