clcdev
New Member
I have 3 flex panels that purport to produce 600 watts each (I originally had 4 but after a major thunderstorm I lost 1). I also have a 30 amp solar controller, a 12v battery bank, and a 12v 2000 watt inverter. I cannot seem to get my system to work. The controller will not show me that the solar panels are connected (even after solving the loose wire connection with fallens) or filling the bank. The inverter seems to be stuck on empty. I followed all directions precisely. No crossing negative with positive, negative first, first battery then solar. The whole 9 yards. Help?
My thoughts are after doing some research to just use one of the panels and a 50 amp controller, but I would like the opinions of others who have more experience in this. Eventually I want to be able to use all of the panels and grow my system to 48 volt system.
My thoughts are after doing some research to just use one of the panels and a 50 amp controller, but I would like the opinions of others who have more experience in this. Eventually I want to be able to use all of the panels and grow my system to 48 volt system.