So I just went out and checked. When set at 2A I didn’t see any positive current on packs 1 & 2, but saw amperage on packs 3 & 4. See first pic.
I then upped charge current to 7A, that’ll be pic 2.
I finally settled at 10A, that’s pic 3,
I’m starting to pull my hair out with this. lol. I’m hoping my chargeverter gets in sooner, rather than later. I’m chasing my tail here, can’t get cell voltages to 3.4x without overcurrent protection. I’m going to let it charge at 10A for a bit and try dropping it down to between 2-5 once it gets closer.