diy solar

diy solar

1000VDC need to connect

archienoah46

New Member
Joined
Jul 12, 2023
Messages
1
Location
Upper Pilton Queensland Australia
Hi have a 330 w 1000VDC max output solar panel need to set up a solar system to run camp fridge 98 litre, lights ,desktop,tv,etc total output 6KVA or roughly 6000W or more if possible just expense that needs to be taken into account Australia is not the cheapest country around being on a country block in Australia Queensland no powerlines available need solsr power can you help with a power supply from solar panel to batteries i am not expert please help Mitch
 
Post a photo of the label on the back of your solar panel, or simply post all of the info written there. And also post the model number of your solar charge controller MPPT. Then we can help.

Some MPPT's have a minimum required voltage to operate. Not sure if a single 330W panel would be enough, that's one reason why we need your MPPT model name and number. Note that your panel does NOT output 1000VDC, it will be much less than that, probably about 55-60v. If this is enough voltage, you're in business.

I also suggest you look around on the forum a bit more here to learn some of the basics. It's not difficult to hook up a simple system like yours, but you are playing with electricity and you can hurt yourself (if more than 12v system) or fry electronics. What do you have for a battery? And what is your system voltage (12v, 24v or 48v)? Your battery voltage usually determines your system voltage.
 
Back
Top